Gateway » 400 Series » 400SD4

Gateway » 400 Series » 400SD4 LCD Screen Replacement Guide

How to Remove Replace Install your Gateway 400 Series 400SD4 Laptop LCD Screen

1. Remove the rubber covers from you Gateway 400SD4 LCD Screen.

2. Use a philips head screw driver to remove the screws.

3. Pry off the Gateway 400SD4 Plastic LCD bezel.

4. Remove the screws from the side of the LCD hinges.

5. Handle the Gateway 400SD4 LCD hinges with care as they are delicate.

6. Place the Gateway 400SD4 LCD Screen down on its front and remove the LCD ribbon cable from the LCD.

7. Unplug and remove the Gateway 400SD4 Inverter from the LCD.

8. You are now ready to replace and install your new Gateway 400SD4 LCD Screen.

9. Recconnect back your Gateway 400SD4 Inverter LCD Cable and Hinges.

10. Place the screws back in and secure the Plastic LCD Bezel back in place.